To install a foundation pile, it must be forced into the ground. This is often done using a pile driver. A vibratory hammer is a unique type of pile driver because—instead of using large weights to strike piles into the earth—it uses vibrations to reduce the eart...
Click to continueBefore operating a pile hammer, the following steps should be taken to ensure the machinery is in good working order and that all workers understand proper procedures to avoid injury.
Before b...
Click to continueUnlike traditional pile drivers that use large weights to strike piles into the earth, vibratory hammers use vibrations to reduces the friction between a pile and the soil, which allows the pile to “sink” easily into the ground. Employing this technique, n__ew pi...
Click to continueIf there is a soft layer of soil at the surface of a construction site, or if an exceptionally heavy building is being built, the soil will not be able to support the weight of a new structure. Because of this, foundation piling must be used. The purpose of found...
Click to continueOil and gas transmission projects often involve working in uninhabited and isolated areas. These areas can present problems in terms of physical access for both workers and machinery. They can also involve delicate ecosystems that should be minimally disrupted. C...
Click to continueSlide rail shoring is a type of modular component shoring system that’s used in place of driven tight sheeting or build-in-place timber shoring systems. Slide rail shoring is unique in that it employs a “dig and push” installation method that allows for quick, ef...
Click to continueUsed vibratory hammers are hammers that have been used before and are being sold for reuse. Due to the high cost of new equipment and wait times on new models, purchasing a used vibratory hammer can be a practical, cost-effective option.
Slide rail shoring is a type of modular component shoring system that’s used in place of driven tight sheeting or build-in-place timber shoring systems. Slide rail shoring is unique in that it employs a “dig and push” installation method that allows for quick, ef...
Click to continueTrenches are temporary and are usually backfilled with soil after construction. While a project is underway, however, it’s possible to cover a trench so that traffic may continue using the road as normal. This is done with a trench plate.
Tre...
Click to continueFlexifloat modular/sectional barges are made of welded steel and engineered for use in the shallow water of inland areas. They are built to be used repeatedly for a variety of projects and can support significant loads of static heavy equipment as well as heavy e...
Click to continue